Quantity in Cart: 0 - $0.00
Track your orders
Coolant hoses and bases
Carbide drill bits->
Chucks and collets->
Diamond brazing segments
Diamond coated ...->
Diamond sintered ...->
Diamond segment blades and cups
Diamond masonry core bits
Diamond vacuum brazed tools
power tools accessories
Resin bonded pads->
Resin CBN wheels / points->
Silicon carbide sticks/paper...->
Stone and Rubber points
2.35mm shank tools
:: other accessories
Filter Results by:
Items starting with ...
Aluminum backing plate 6"
6", for laps, leather, wool pads…, mounting hole size:19mm 3/4" with one pc set screw, nw:384g
Aluminum backing plate 8"
8", for laps, leather, wool pads…, mounting hole size:19mm 3/4" with one pc set screw, gw:700g
Mounting shaft for 1" hole wheel
For 1" hole wheels, total length:97mm, shaft diameter:10.6mm, gw:186g
Mounting shaft for 6mm hole blades
Mounting shaft for 6mm hole blades, shaft diameter:7.2mm, shank length:59mm, total length:64mm, nw:25g
Mounting shaft for 8mm hole blades
Mounting shaft for 8mm hole blades, shaft diameter:7.9mm, shank length:52mm, total length:69mm, nw:33g
Mounting shaft for 12mm hole blades
Mounting shaft for 12mm hole blades, shaft diameter:9mm, shank length:55mm, total length:74mm, nw:52g
Mounting shaft for 1/2" hole blades
Mounting shaft for 1/2"(12.7mm) hole laps or blades, shaft diameter:8mm, shank length:68mm, total length:86mm, nw:58g
Bristle polishing wheel - 2-1/2"
Diameter:2-1/2", hole size:1/4"mm, gW:40g
Plastic changeable reducers set
From:1-1/4" to 1",1" to 3/4",3/4" to 5/8",5/8" to 1/2", width:3/4", nw:13g
For dressing grinding wheels, shank dia:10mm 3/8", total length:47mm 1-7/8", gw:31g
Pin vice double end 0.2~2.5mm
Round double end pin vise, nickel plated, diameter:7.8mm, two hardened collets, chucking capacity:0.2~1.0mm and 1.7~2.5mm, total length:100mm, nw:28g...
Drill guide suction cup type - 4~12mm
Suction cup type, for drill bit sizes 4,5,6,7,8,10 and 12mm, steel plate inside to ensure accuracy and durability, nw:101g
Drill guide suction cup type - 4~83mm
Capacity:4mm to 83mm, with 4 bearings, suction cup type, dimension:210mmx140mm, nw:338g To drill 4~50mm:remove all bearings and turn lower plate...
Water feeding swivel adaptor - 10mm
supply water or coolant through center of drill bits, nikel plated, shank 10mm, fits 10mm stem, nw:218g To be useD with any 10mm hollow stem hole saws
Carbide tipped compass 6"
Premium carbide tipped, hardness HRA88, maximum opening:7" suitable for marking on metal, glass, tile, ceramic, gems… nw:183g
Copyright © 2015